Oil & Gas Glossary 1.0

A special device that, when fitted in to the master bushing, transmits torque to the kelly and simultaneously permits vertical movement of the kelly to make hole. It may be shaped to fit the rotary opening or have pins for transmitting torque. Also called

A device that fits into the rotary table to accommodate the slips and drive the kelly bushing so that the rotating motion of the rotary table to accommodate the slips and drive the kelly bushing so that the rotating motion of the rotary table can be transmitted to the kelly. Also called rotary bushing.

The machine used to impart rotational power to the drill stem while permitting vertical movement of the pipe for rotary drilling. Modern rotary machines have a special component, the rotary or master bushing, to turn the kelly bushing, which permits vertical movement of the kelly while the stem is turning.

Those parts of the drilling or workover rig that are designed to turn or rotate the drill stem and bit - swivel, kelly, kelly busing, master bushing, and rotary table.

See kelly bushing

1. a large valve located on the Christmas tree and used to control the flow of oil and gas from a well. Also called master gate. 2. the blind or blank rams of a blowout preventer (obsolete).

A large valve used to shut in a well.

2. a removable lining or sleeve inserted or screwed into an opening to limit its size, resist wear or corrosion, or serve as a guide.

1. a pipe fitting on which the external thread is larger than the internal thread to allow two pipes of different sizes to be connected.

A manifold system of valves, usually situated at the power source, which may be operated manually (or by remote control) to direct pressurized fluid to closing devices at wellhead.

A system of controls, convenient to the driller, which can be used selectively to actuate valves at the master control panel.

The valve on the choke and flow line that is nearest to the preventer assembly. Its purpose is to stop the flow through the choke and flow line.