Oil & Gas Glossary 1.0
OIL & GAS TECHNICAL TERMS GLOSSARY
If you are looking for a definition of any technical terms in oil & gas field, then this site is yours.
Until now, we've collected around 2000 technical terms, but if this still not enough, and you've found any term that is not in our database, please contact us, and we will happily find it for you, or you can just check it again later, because every unsuccessful search will be recorded by our system for later update.
Thanks and happy searching ^^.
Search Result for Slip Bowl
slip bowl
A device in a rotary table or other tool into which tubing, drill pipe, or slips can be inserted.
slip segment
A singular component of an entire slip system
dovetail
A cutout section in a cone enabling positive slip movement without the aid of conventional slip return springs
button slip
A slip employing tungsten-carbide "buttons" in lieu of conventional wicker-type teeth to set tools in very hard casing.
bowl
A device into which fit the slips or wedges which support tubing.
dome
A geologic structure resembling an inverted bowl; a short anticline that plunges on all sides.
slips
Wedge-shaped toothed pieces of metal that fit inside a bowl and are used to support tubing or other pipe.
dresser sleeve
A slip-type collar that is used to join plain-end pipe.
single-grip
Used to describe packers with one slip system for supporting weight and pressure from above only.
ratchet
A generic term used to describe certain tool movements, such as the cone-to-slip engagement on permanent packers or plugs.
slip velocity
1. the rate at which drilled solids tend to settle in the borehole as a well is being drilled.
slip velocity
2. difference between the annular velocity of the fluid and the rate at which a cutting is removed from the hole.
slip ring
A conducting ring that gives current to or receives current from the brushes in a generator or motor.